iR2622 User Manual
4. About Indicates GUI Management Software version
!
Unstable system after connecting iR2622
Q1.
After installing iR2622, we are unable to start the computer or the computer can not locate
iR2622 upon startup.
A :
1. Please check whether the readings on the iR2622 LCD display screen appear normal.
2. Please check whether the SATA Cable connection cables are properly connected to the
computer system and whether SATA drives are functioning normally.
3. If everything is functioning properly but the user still can not start the computer system,
then the problem might be the system incompatibility. If such incompatibility takes place,
please contact our technical support department.
Q2.
When the iR2622 is in use, the computer system is functioning normally but the iR2622
access speed is abnormal.
A :
Please first check whether the iR2622 is in the progress of executing data auto-rebuild.
1. Please examine if the length of the connection cables, SATA cable that connect the drives
to the computer system is too long and whether the specification these cables complies with
the requirements.
2. If both the lengths and specification of the cables are checked out ok, please turn off
iR2622 and remove the hard drive from iR2622. Test the hard drive directly with the
computer system since it might be the bad sectors in the hard drive that are causing the
longer than normal system down time.
Hard Drive Failure
Q1.
Under the mirror mode (RAID 1), what will be the system’s total storage capacity when
adding a brand new hard drive?
A :
1. The total storage capacity for iR2622 is determined by the storage capacity of the primary
hard drive installed during the initial usage.
2. The storage capacity will not increase after initial installation even when place a brand
new hard drive with larger storage capacity.
10. Frequently Asked Questions
!
12
