iR2622 User Manual
Q2.
Why does the error message appear when I installed the second hard drive?
A :
1. The storage capacity of the second hard drive must be larger than the first hard drive.
Otherwise, iR2622 can not rebuild the new hard drive.
About Auto Rebuilding Function
Q1.
What will happen if we turn off the computer’s power while iR2622 is still executing data
auto rebuilding?
A :
Under the mirror mode (RAID 1), if the power is out of the auto rebuilding process, the
controller will remember when completion percentage of the auto rebuilding process and
resume the rebuilding process when the power is back on.
Q2.
Is it possible to lose any part of the data during the data auto rebuilding?
A :
The data auto rebuilding function will copy data from one sector to another sector.
Technically speaking, the data will not be lost during the auto rebuilding process. However, if
the original hard drive is detected with bad sectors during the rebuilding process, iR2622 will
make hypothetical duplication instead of treat the bad sectors as hard drive failure.
Therefore, the data stored in the bad sectors could potentially be lost during rebuilding.
!
13
