5. Hardware Installation is completed.
※
For future SSD or HDD exchange, please open the front panel to 90 degrees, perpendicular to the
surface cover and withdraw the SSD/ HDD.
1.4 Start-up of iH1010 and Drive Device
1. Power on your system after hardware installation completed. Insert the product CD from the package
into your CD-ROM, and locate “HyBird GUI.exe” file from the CD then double click to execute GUI
program. After login to GUI, click on [System Setup] →
[Initialize] → [Setting] to initial the drives.
Once the message “Auto partition completed” appears, please re-booting your computer.
※
The initialize setting is not necessary, when you already finished the partition via function mode.
6
Product Introduction
