Raider TG-GT24, User Manual

Page: 16 / 30

16 www.euromasterbg.com
Faults Removal Reasons
Trimmer does not
start to work
Power cable is not connected or
damaged
Check cable. If necessary, replace it.
The engine start
but the knife does
not rotate.
Trimmer is in a tall grass. Upon initial release always put the
trimmer in the grass
It is possible that the trimmer is
fuzzy and the blade is blocked.
Disconnect the plug and check it. Put
on your protective gloves and clean the
knife and release
Engine is turned off
suddenly.
The power plug is withdrawn
Check cable. Make sure it is well
enshrined in the device (14) and plug
it again.
Unusual noise.
Bolt of the blade is loose or
connections between fasteners. Fasten the parts.
Strong vibrations.
Distorted and damaged knife. Immediately stop the trimmer and
replace the knife in a specialized
service.
Unequal mowing.
Engine work
hard and reduce
turnovers.
The grass is very high. Increase mowing height.
The blade is blunt. Replace or tipped knife. .
It is possible that the trimmer is
fuzzy and blocked
Look underneath the trimmer and clean
it. Work always with protective gloves.
The blade can be installed
incorrectly.
Check.
If necessary, repair your trimmer is best carried out only by qualified experts in workshops
on TOPGARDEN, which used only original spare parts. Thus ensuring their safe operation.
7. Environmental protection. Do not dispose of waste electrical equipment in
domestic waste! In order to protect the environment and Directive 2002/96/EC,
they must be collected separately and be subjected to appropriate processing for
recovery of the information contained in these materials.
Product Features:
1. Lever of the switch.
2. Power cord.
3. Main handle.
4. Housing
5. Auxiliary handle.
6. Electric motor.
7. Fuse.
8. Cord head.