Raider RDP-SPSH20 solo, User Manual

Page: 14 / 54

14 www.raider.bg
applications other than those specified by the manufacturer increases the risk of accidents
at work.
1.5. Instructions for safe operation, specific to the cordless shears purchased by you.
Attention! Loss of control of the power tool can lead to accidents at work.
1.5.1. Do not use accessories that are not recommended by the manufacturer specifically for
this power tool. The fact that you can attach a specific device or work tool to the machine
does not guarantee safe operation.
1.5.2. Never place your hands near rotating work tools.
1.5.3. If you carry out activities where there is a risk of the work tool falling into hidden live
wires, hold the power tool only by the insulated handles. When the work tool comes into
contact with live wires, it is transmitted to the metal parts of the cordless cordless pruning
shears and this can lead to electric shock.
1.5.4. Use suitable utensils to locate any pipes hidden under the surface, or contact the
relevant local supply company. Contact with live wires can cause fire and electric shock.
Damage to a gas pipeline can lead to an explosion. Damage to a water supply system results
in great material damage and can cause electric shock.
1.5.5. Hold the machine firmly.
1.5.6. Regularly clean the ventilation holes on your cordless pruning shears.
1.5.7. Use only the recommended battery and charger.
1.5.8. Use a soft, dry cloth to clean the cordless pruning shears. Never use any solvent or
alcohol.
2. Functional description and purpose.
The cordless brushless pruning shears is a hand-held cordless power tool. It is designed
for pruning and shaping grass and shrubs at home. The use of cordless pruning shears for
activities other than its intended use is not permitted.
3. Start the cordless pruning shears.
You need to charge the battery / not on. in the kit / before using your machine for the first
time.
• Use only the charger / not on. in the set /, recommended by the manufacturer.
• Use the charger only in dry indoor areas.
• Plug the charger into a 230V AC mains supply, and insert the charging socket into the
battery compartment.
• Do not turn on the machine during the charging process.
• To switch on your cordless pruning shears, first press the trigger switch (1), then press the
trigger lever (2) twice. Press and hold the trigger lever (2) to stop the machine. To switch off
the machine completely, disconnect it from the trigger switch (1)
• The handle may become hot during the charging process. This is normal.
• Remove the battery if you do not intend to use the machine for an extended period of time.
• Do not turn on the machine during the charging process.
4. Maintenance and storage
4.1. When not in use, do not keep the machine out of the reach of children;
4.2. Always clean the residue on the cutting head with a brush.
4.3. Apply spray to support the cutting head to prevent rust.
4.4. Attach the appropriate guards to the cutting head before storing it for an extended period
of time.
Always wear protective gloves when working near the knife!
Perform maintenance procedures regularly to ensure long-term and reliable use of the
machine. Check periodically for noticeable defects, such as a loose or damaged blade and
loose screw connections. Make sure that the covers and safety devices are in good condition
and installed correctly.
To clean the tool, use only mild soap and a damp cloth to clean the tool. Do not immerse the
tool in water or wash it with a hose. Do not allow any liquid to enter it. Do not spray with a
water jet.
5. Practical advice:
5.1. Observe municipal regulations for the time of day when you can use machines outdoors.
In some countries it is forbidden to cut in the morning before 08.00, in the afternoon between