Raider RD-TS20, User Manual

Page: 14 / 64

14 www.raider.bg
12. POSSIBLE MALFUNCTIONS AND WAYS OF REPAIR
Name description of
malfunction
Pretention reasons Method of the repair
The machine does not start a) No voltage in power source
b) No contact in the plug with the
connection cable
c) The button “Start “ of the switch
doe not function
d) Defects of motor, switch, cable
а) Check the voltage in the
electric socket using any
properly functioning other
household appliance;
b) Fix or replace the plug ;
c) Fix or replace the switch.
d) Contact certified electrician
Electric motor gets
overheated
а) The machine is overloaded with
too much feeding of the material
a) Reduce the flow of the
material
The motor is run, but saw
blade is not rotate
a)Belt is torn
b)Belt is worn
Replace the belt
Strong vibration when
operating
a) The machine is based on the
uneven surface
a) Even up the position of the
machine
Sudden stop a)Voltage’s gone
b)The defects of motor, switch,
cable
a)Check the voltage
b)Contact the service center
The treated surface looks
bad
a) The billet is knurled
b) The billet is damp
Replace the billet
Low cutting efficient a) The belt slips a) Replace the belt