Raider RD-TS10, User Manual, Page: 10 / 56

18
19
www.raider.bg
Put the main part 1 on the proper table for tools.
Use 2pcs M6x16 hex head screw, 2 pcs M6 big
flat washer, 2pcs M6 protective-loosening screw to
assemble the part 2 (with No.3 on the main part 1.
In the position of 3, the screw can’t be tightened
too firmly. (fig. 1 the screws are assembled in the
position of A, B).
Use 2 pcs ST 1,2 x 13 self-driving to mount the
part 6 on the part 2 (fig. 2).
Loosen the part 12, turn the part 13, use supplied
cable binder to tighten cable, turn the part 13, fix
the part 12 (fig. 3).
Use 3 pcs M6 x 16 Sex-head screw, 3 pcs M6 big
flat washer, 3 pcs M6 protective-loosening screw
to assemble the part 3 (with no. 4 on the main part
1) In the position of 4, the screw can’t be tightened
too firmly. (fig. 1 the screws are assembled in the
position of A.B.C).
Use 4 pcs M6 x16 sex head screw, 4 pcs M6 big
flat washer, 4 pcs M6 protective-loosing screw to
assemble the part 4 (with No. 5) on the main part
1, the screw in the position of 5 can’t be tightened
too firmly (fig.5)
Use 5 pcs M6 x M16 sex hand screw, 5 pcs M6
big flat washer, 5 pcs M6 protective-loosing
screw to assemble the part 5 (with No. 6), the part
7, the part 8 on the main part 1. the screw in the
position of 6 can’t be tightened too firmly (fig. 6).
Use the part 9, 10 to connect the part 2, 3, 4, 5
(fig. 7), the screw can’t be tightened too firmly.
Use the part 11 to connect the part 9, 8, (fig. 8). In
the process, 4 pcs M6 x 16 screw, 4 pcs M6 big
flat washer, 4 pcs M6 protective-loosening screw
are used. The screw can’t be tightened too firmly.