c)
Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.
Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d)
Store Idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool's operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power
tool for operations different from those intended could result in a hazardous situation.
5)
Service
a)
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
6. PRECAUTIONA ON USING MIXER
Attentionl
You must abide by the following basic safety measures against electrical shocks,
injuries and the danger of fire when using electric tools. Read and abide by these instructions
before you start to use any tools. These instructions must be kept in a safe place. You will also find
other safety instructions in the accompanying booklets. _ The equipment must never be used in
surroundings where an explosive atmosphere exists. Never mix in solvents or substances
containing solvent that have flash points below 21 °C.
_ Do not let the cable touch any parts of your body.
_ Only use the extension cable approved for use in the working area.
_ The unit must only be started and stopped when it is inside a mixing vessel. Ensure that
the mixing vessel is placed on a solid, secure base.
_ Never reach into the mixing vessel with your hands or any other object during the mixing
process.
_ We recommend that you always wear industrial safety gloves and safety goggles when
working with the mixer.
_ Wearing close-fitting clothes is mandatory.
_ Always allow for reaction torque
_ Always wear a dust mask
24
