12
www.raider.bg
a conductor”
7. Installing the plug on conventional chuck
(pre-set !!!).
Fix a stationary ring of the chuck and loosen
front moving part while the nozzle hole is wide
enough to allow freedom to put the desired tip.
After inserting the nozzle back to tighten the chuck
moving part while locking tip. Make sure the nozzle
is tight as well pull it along the axis of the machine.
8. Removing the tip of a conventional chuck
(pre-set !!!).
Fix the ring loosen the chuck stationary front,
while the chuck holes become large enough to
allow freedom to remove the nozzle.
9. Turn the machine.
On - Press power trigger (poz.A)
Off - Free electric trigger (poz.A)
10. Auxiliary handle.
WARNING! Udarniyat breaker RD-HD03 is
equipped with a protective system in wedge or
pinch the working tip during operation. However,
it is unacceptable use of instruments without
MOUNTED HANDLE MORE!
Auxiliary handle (poz.B) allows safe and stable
operation. Setting the position you need done
lightly, simply unscrew the handle, place it in the
desired position and retighten.
11. Depth.
With the help of depth akutratno can adjust the
depth of the bores.
12. Modes of operation.
WARNING! NEVER change the behavior AT
WORK THE MACHINE!
- Mode “Hammer drilling”
Press the release button (item 7) and turn
the switch operating modes (item 2) into position
(fig.1)
- Mode “Chiselling”
Press the release button (item 7) and turn
the switch operating modes (item 2) into position
(fig. 2)
- Mode “Drilling”
Press the release button (item 7) and turn
the switch operating modes (item 2) into position
(fig. 3)
- Mode “Setting the drill”
Press the release button (item 7) and turn
the switch operating modes (item 2) into position
(fig. 4)
13. Sharpening chisels.
Sharp chisels ensure fast and smooth operation.
It is desirable to sharpen chisels on the grinder
periodically in a scheme described in the figure:
Summary of Contents for RD-HD38
Page 51: ...51 Exploded drawing of Rotary Hammer RD HD38 ...
Page 62: ...62 www raider bg ...
Page 67: ...67 ...
