Raider R50ES-001, Owner'S Manual

Page: 49 / 78

SECTION 2
Owner’s Manual Standard Operating Procedures
39
E
MERGENCY
(T
ERTIARY
) S
TARTING
In the event of failure of both the Recoil
Starter and the Electric Start function the
Raider may be started using a tertiary or
emergency starting method. Using the
items provided in the Emergency Tool Kit
(ETK) follow the following steps.

Remove the motor cowling and
secure it in the craft.

Using the 10mm socket and driver,
remove the three (3) 10mm bolts
and washer that secure the recoil
starter over the starter pully and
flywheel.

Remove the Starter Lock Wire
from the Starter Lock Arm and
stow the Recoil Starter.

Using the cord from the ETK tie a
knot in one end.
 Wind the cord around the flywheel
and use a socket.
Use a socket
wrench or similar to get a firm grip
on the end of the rope.

Give it a sharp tug to start the
engine.
Be careful that your clothes or other items do not get caught in the rotating engine parts.
To prevent accident and injury, do not reattach the recoil starter after the engine has been started
using the emergency starter rope. Be sure to put the top cowl back on.