Raider Pro RDP-WP27, User Manual

Page: 28 / 62

www.raider.bg
28
WARNING!
Read this manual carefully for your own
safety before attempting to operate the
machine!
SAFETY INSTRUCTIONS
When working with the machine, always fol-
low these instructions for use and attached
supplied tool “General rules on safety.”
In this manual, the following symbols are
used:
WARNING! Risk of injury or
damage to the instrument.
WARNING! Before starting work
familiarize yourself with the
instrument instructions.
Before operating the pump,
please note the following!
• The pump can be plugged into any
grounded outlet and izpliran (based on
safety). The contact must be powered
230V-50Hz, and minimum fuse 6A.
Attention! In case the pump is
used in proximity to a swimming pool or
garden reservoirs need to be connected to
a grounding system with a current of
mah.30mA. Do not turn on the pump, if
there are people in the pool or tank! To
connect the grounding system described
contact a qualified electrician.
Attention! (It’s important for
your own safety)
Before your new submersible pump, please
note the following things should be checked
by an expert.
• Grounding
• Zeroing
• The emergency stop switch circuit must
meet the electrical installation and works
flawlessly.
• All electrical connections must be protect-
ed from moisture
• If the power cord is likely to be touched by
outsiders, be sure it is appropriate for them
unattainable height.
• The proximity and circulation of aggres-
sive fluids and abrasive materials around
the pump and power cord should be
avoided at all costs.
• In winter take precautions against possible
freezing of the submersible pump.
• It is necessary to protect the pump from
the direct impact of rain.
Take the necessary measures to prevent
children from accessing the pump or power
cord.
It pump is suspended from the handle
provided for this purpose on the pump body.
To make sure that the pump will operate
flawlessly necessary air intakes in the lower
part of the body are far from any dirt or mud
bottom vegetation.
If the water level is falling too rapidly, it will
lead to drying out of accumulated sedi-
ment or sludge in the bottom of the shaft,
or around and in the pump inlet, which can
lead to malfunction of the pump. Periodi-
cally clean the pump from debris and test
whether it involves time.
Power
Your new submersible pump is equipped
with a protective plug from electrical shock
designed for connection to the supply volt-
age 230V-50Hz. Be assured that contact
you plug the pump is secured and is in
working condition.
Attention! If the cord or plug has traces of
any injuries as a result of interference do
Submersible Pump for Sewage Water
RDP-WP27