Raider PRO RDP-SCBG20 SOLO, User Manual

Page: 24 / 80

24 www.raider.bg
2. Depress down the spindle shaft lock button and attach the flexible shaft onto the tool by
twisting the flexible shaft connector clockwise while screwing it onto the thread of the spindle
shaft as far as it can go.
3. Insert the wrench into the hole on the flexible shaft head and hold on to lock the spindle
shaft of the flexible shaft ,then loosen the Collet nut by twisting it anticlockwise.
4. Insert the Wheel point into the hole of the Collet nut And then tighten the Collet nut by
twisting it clockwise.
1. Right wheel shaft cover 2. Thread of the spindle shaft 3. Spindle shaft lock button 4.
Flexible shaft connector 5. flexible shaft 6.Hole 7.Wrench 8. Collet nut
CAUTION: After attaching the flexible shaft , make sure that the flexible shaft is firmly
secured.
CAUTION: After attaching the collet nut, make sure that the collet nut is firmly secured.
9. USING THE SPINDLE SHAFT CONNECTOR FOR SIDE BRUSHING
To use the side brushing function, perform the following steps:
1. Attach the bristle brush onto the spindle shaft connector by twisting the spindle shaft
connector clockwise as far as it can go.