60
61
www.raider.bg
«RAIDER» power tools are designed and manufactured in accordance with the regulations and standards
for compliance with all safety requirements.
Content and scope of the commercial guarantee.
WARRANTY CONDITIONS
The warranty period is:
- For domestic use (private)
- For professional use (for companies)
User is entitled to free repair service in insured warranty period if the warranty card is filled properly made
with signature and dealer’s stamp, sold the instrument signed by the client that is aware of the warranty
conditions and fiscal cash register receipt or invoice showing the date of purchase.
Repairs are accepted only cleaned machines!
Appliances should only be used appropriately and in accordance with the instructions.
To ensure safe operation is required the customer to be familiar with instructions for use of power tool
safety rules when working with it and its particular purpose. The unit requires periodic cleaning and proper
maintenance.
Warranty does not cover:
- Wear of colored coating of tools;
- Parts and consumables, which are subject to wear caused by use such as: grease, oil, brushes, guides,
rollers, pads, drive belts, flexible wire shaft, bearings, seals, piston with a hammer tackers, etc.;
- Accessories and supplies such as: handles, nose, batteries, cases, chargers, drills, cutting discs, chisel
knives, chains, sandpaper, stops, polishing discs, chucks (grip, holder of the cutting tool) to cord reel itself
cord for lawn mowers, etc.;
- Fusible fuses and bulbs;
- Mechanical damage to the hull and all external components of the device, including ornamental;
- Fuses eye fuses cutting tools, rubber plates, frames, rulers, etc.;
- Cord and plug;
- Overall damage to instruments caused by natural disasters such as fires, floods, earthquakes, etc.;
The warranty is not valid in cases where:
- Inconsistent serial number of this article with a completed warranty card;
- The label is removed or completely missing one;
- Is attempting to unauthorized interference with unauthorized service base camp;
- Damage caused due to misuse (non instructions) of the device by the customer;
- Damage caused due to careless handling of the device;
- Damage to rotor or stator, consisting of the bonding between them, due to melting of insulation caused by
the continuous overload;
- Damage to rotor or stator caused by overload or impaired ventilation, expressed in the change of the
collector or windings;
- No protective disks, support panels or other components that are part of the structure of the instrument and
are intended to ensure its safe and proper operation;
- The cord of the instrument is extended or replaced by the customer;
- Damage caused by overload or lack of ventilation and insufficient lubrication of moving components;
- Wear and tear bearings or blocked due to overloading, or powder;
- Broken bearing collar;
- Breach the integrity of the teeth of gears (broken, worn);
- Broken spline or bolting;
- Failure On/Off switch or electronic control caused by dust or breakage;
- Broken gear box (head) caused by the lock mechanism;
- Occurrence of abnormal clearance between piston and cylinder as a result of overloading or dust;
- Tightening between piston and cylinder as a result of overloading or dust;
- Damaged centrifugal wheel and brake (discolored) - due to work by a blocked brake;
The deadline for a renovated adopted in electric service is within a month.
Workshops are not responsible for the instruments are not contacted by the owners one month after the
statutory period for repair!
MODEL.............................................................................................................................................
SERIAL №
....................................................................................................................................
TERM ...............................................................................................................................................
№, date of invoice / cash receipt
..................................................................................................
DETAILS OF BUYER
NAME / COMPANY
...........................................................................................................................
ADDRESS.........................................................................................................................................
SIGNATURE OF BUYER...............................................................................................................
WARRANTY CARD
DETAILS OF SELLER
NAME / COMPANY
............................................................................................................................
ADDRESS .........................................................................................................................................
DATE / STAMP
................................................................................................................................
(be filled in by the employee)
(be filled in by the employee)
(I am familiar with warranty conditions and the operating device is in good
working order and accessory)
(be filled in by the employee)
(be filled in by the employee)
SERVICE REPORT
Receiving
Protocol
Date of
adoption
Description of the defect
Date of
transmission
Signature
Central Service: Bulgaria, Sofia, “Lomsko shose” 246, tel .: +359 700 44 155 (free for the whole country)
(for details see the warranty conditions)
