7
Confirm New Password:
Re-key the new desired admin password to
confirm.
Apply:
Click the “Apply” to save change of password.
1.3
System
→
UPS
This page is to enable/disable UPS (un-interrupted power supply) Service, to
manage some UPS selections/settings.
Service Control
→
Enable Service:
Checking this option box will enable UPS service.
By default, this service is disabled.
UPS:
This window lists the supported UPS brands and models. Scroll down to
find more brands and models.
Port:
‘
port 1’
= COM1
; ‘port2’
= COM2
; ‘USB’
= USB port on the NAS system
.
Select the proper Port Type according to what connectivity you have between
the NAS and your UPS.
Poll Frequency:
This represents how often the system will check the UPS status.
By default, if the USP service is enabled, this is pre-set to 5 seconds.
Shutdown Delay:
This represents how many seconds to wait before initiating the
actual shutdown after receiving the shutdown signal from UPS service. This is
pre-set set to 300 seconds.
Apply button:
Click the “Apply” button to save the changes to the above fields.
