RAIDExpress 133 RAID USER MANUAL
59
are not physically attached to IT8212 controller, from your
system.
3.2.2
Check system BIOS setting.
In your system bios setup menu, change Boot Sequence in
such a way that system will first boot from CDROM, and then
from SCSI. Refer to your BIOS manual to see how to set boot
sequence.
3.2.3
Prepare the driver diskette.
Copy all the files under /linux/driver/rh73/ directory to a new dos
formatted disk.
3.2.4
Install Red Hat 7.3.
Start installing Red Hat 7.3 by booting with the CDROM.
On "welcome to Red Hat Linux 7.3!" installation screen, a
prompted label "boot:" will appear at the bottom of the
screen. Then type in "expert" and press enter.
Then you will be asked "Do you have a driver disk?".
Select "Yes".
When "Insert your driver disk and press "OK" to continue"
is prompted, insert the driver disk in the floppy driver and
then select "OK". Then the IT8212 driver will be loaded.
Continue the installation as normal. You can refer to the
Red Hat Linux installation guide.
