RAIDExpress 133 RAID USER MANUAL
14
Setup Utility
Using the RAIDExpress 133 Card Setup Utility
The RAIDExpress 133 card Setup Utility provides functions to create, delete and
rebuild an array. It also provides the information of each hard drive and the
configuration of the RAIDExpress 133 card. Please attach your hard drives to the
RAIDExpress 133 card and boot your system. If your array’s configuration is correct,
you will see the following message shown by the RAIDExpress 133 card onboard
BIOS on the screen. You can press “Ctrl-F” or “Ctrl-E” keys to enter Setup Utility or
press the “Esc” key to skip and boot directly.
If your array’s configuration is incorrect, you will see an error message on your
screen. You have to enter Setup Utility to reconfigure the arrays then quit utility to
boot.
