RAIDExpress 133 RAID USER MANUAL
13
Setup Array for IDE:
You can use the RAIDExpress 133 card as a normal IDE controller. The
RAIDExpress 133 card allows you to use one, two, three or four hard drives. All the
hard drives attached on the RAIDExpress 133 controller are left to act as
independent drive volumes.
Please follow the procedures below to set an array:
Use the “space” bar key to select a RAID type.
Press “Ctrl-Y” keys to save and create an array. If you select RAID 0, 1, 0+1 or
JBOD, the boot sector of the newly created array will be erased. If you select
IDE, the boot sector will be remained.
Warning: If you prefer to keep data in your hard drives, please
follow the procedures in the Define RAID section on page 21 to
setup your arrays manually.
!
Click the “Esc” key to go back to the
on page 9.
Click the “Esc” key to quit BIOS and boot.
You need to FDISK and format your new array. The new array will be regarded
as a new hard drive by the system.
