Rage X-Fly VTOL, Instruction Manual

Page: 4 / 6

Item Number Description
RGRA1160 Propeller Set (4)
RGRA1161 Replacement Motor (CW)
RGRA1162 Replacement Motor (CCW)
RGRA1163 1S 3.7V 250mAh Lipo Battery
RGRA1164 400mA USB Charger
RGRA1165 2.4GHz Transmitter
5. Forward/Backward Trim: If the X-Fly tends to move forward, press the Backward Trim button several
times until the X-Fly no longer moves forward on its own. Press the Forward Trim button if it flys backward
on its own.
6. Left/Right Trim: If the X-Fly drifts right, press the left trim button; if it drifts left, press the right trim button.
7. Dual Rates: Press the right stick inward to change from low to high rate. The controller will beep twice.
High rates increases the tilt angle for faster speeds and increased manueverability. Press the right stick in
again to return to low rates signaled by a single beep.
8. Press the Angle + button to automatically tilt the X-Fly for forward flight. Press the Angle + button up to
3 times to increase the angle for more speed. Use the right stick to steer left and right. Moving the right
stick back will cancel forward flight. During forward flight press the Angle - button the reduce angle and
speed.
9. Autonomous Circular Flight: Press the left stick inward to enter this mode, a series of beeps will be
heard. Move the right stick right or left and the X-Fly with begin flying in a circle. While in this mode other
controls will not function. To exit this mode push the left stick inward again. Make sure you have enough
clear space around the X-Fly prior to initiating this autonomous flight mode.
Calibration Instructions
1. If the X-Fly flies erratically you may need to calibrate the gyro.
2. Place the X-Fly on level ground, turn it on and pair with the controller.
3. Move the left stick all the way down and the right stick all the way up
and hold them there until the LED lights on the X-Fly stop blinking and
remain solid.
4. The calibration process is complete and the X-Fly is ready to take off.
Battery Notes
• Do not dispose of Lithium batteries in a fire.
• Do not leave batteries in hot places such as an automobile in direct sunlight.
• Do not mix new and used batteries, or install used batteries in other equipment.
• Do not mix Alkaline, Standard (Carbon-Zinc), or Recharable (Nickel Cadmium) or (Nickel Metal Hy
dride) batteries.
• Do not reverse the polarity (positive and negative terminals) of batteries.
• For best results use type AAA batteries.
• Install only new batteries of the same type in your product.
• Batteries should be recycled or disposed of per state and local guidelines.
Replacement Parts
Warning:
Small parts ， not for
children under 3 years old.