Charging the Flight Ba ery
Connect the USB charging adapter to a USB port
of your computer or USB power adapter.
Connect the lead from the charger to the drone.
When the light is on, the ba ery is fully charged.
Transmi er Ba ery Installa on
Remove the screw from the ba ery cover using
the supplied screwdriver. Press down on the Tab
and li the cover to remove.
Insert the two AA ba eries. Align the + and - on
the ba eries and transmi er when installing the
ba eries.
Return the ba ery cover into posi on. Reinstall
the screw to secure the cover.
Blade Guard Installa on
Install the blade guards by aligning the guards
with the shape on the bo om of the motor pods.
Press the guards completely into posi on so they
are res ng on the pods. Failure to do so may
cause interference with the blades.
Flight Prepara on
Rest the drone on the landing gear on a level
surface with the camera facing away from the
pilot. Switch the power bu on on the side of the
drone to the ON posi on. The LED lights on the
drone will fl ash rapidly.
Next, turn on the transmi er. The LED lights on
the drone will glow solid once the transmi er
and drone connect to each other.
Take-Off
Press the le joys ck s ck in to start the motors.
The drone will then rise to a height of roughly 3
feet (1 meter) to begin its fl ight.
Flight Controls
The following illustrates the fl ight controls and
responses for your aircra :
Ver cal
Moving the le s ck forward will make the drone
increase in al tude. Moving the le s ck back
will make the drone decrease in al tude.
Rota on
Moving the le s ck to the le will make the
drone rotate counterclockwise. Moving the le
s ck to the right will make the drone rotate
clockwise.
