Troubleshoo ng Guide
Problem
Possible Cause
Solu on
Transmi er
LED does not
light
On/off switch is in the off posi on
Move the switch to the on posi on
Ba eries are not installed
correctly
Re-install the ba eries correctly
The ba eries are exhausted
Replace the ba eries
Drone can not
be controlled
The transmi er is not switched on
Switch on the transmi er
The fl ight ba ery is not charged
Charge the fl ight ba ery using the
supplied charger
The fl ight ba ery is not installed
Install the fl ight ba ery
The transmi er and drone
channels are not synchronized
Turn off both transmi er and drone.
Follow the instruc ons “Flight
Prepara on.”
There is too much wind
Wait to fl y un l there is less wind
Drone will not
take off
Rotor speed is too low
Increase the movement of the
le s ck toward the top of the
transmi er.
The fl ight ba ery is not charged
Charge the fl ight ba ery using the
supplied charger
Drone lands
without input
The fl ight ba ery is not charged
Charge the fl ight ba ery using the
supplied charger
Spare Parts
See your local hobby shop or place of purchase fi rst. If unavailable, parts can be ordered direct at
www.ragerc.com or call 800.622.7223 M
–
F 9:00
–
5:00 Mountain Time.
RGR4111
Propeller Set (4)
RGR4112
3.7V 500mAh USB Charger
RGR4113
Replacement Phone Holder
RGR4114
Transmi er
