7
6.1
Drilling Chart & Dimensions
When mounting the RAEPoint on a wall, make sure to
use heavy-duty steel screws spaced as indicated below.
Follow these steps:
1.
Locate the RAEPoint DC-Powered Wireless Alarm
Bar on a wall or other flat surface and mark the six
holes’ locations.
2.
Remove the RAEPoint DC-Powered Wireless Alarm
Bar.
3.
Drill the six holes.
4.
Hold the RAEPoint DC-Powered Wireless Alarm Bar
firmly against the wall and insert and tighten the
screws.
The RAEPoint DC-Powered Wireless Alarm Bar is now
ready for electrical wiring and testing.