Rae QRAE PLUS PGM-2000, Operation & Maintenance Manual

Page: 56 / 88

PROGRAMMING
4-18
4.6. Change Monitor Setup
Users may change the monitor setup, as shown below, or enter
personal information into the QRAE PLUS:
Change Site ID?
Change User ID?
Change Alarm Mode?
Change User Mode?
Change Real Time Clock?
Change Backlight Mode?
Change Password?
Change Pump Speed?
Change Averaging Method?
Change Display Language?
Set Temperature Units?
Enable/Disable Vibrator?
Monitor Setup Options
1) Site ID – the location information that will be stored into the
datalog with the concentration readings, an 8 digit
alphanumeric character.
2) User ID – The user information that will be stored into the
datalog with the concentration readings, an 8 digit
alphanumeric character.
3) Alarm Mode – determines whether the alarm will latch or
automatically reset after an alarm situation occurs.
4) User Mode – Basic or Advanced Mode controls access to
programming menus, information and security levels as
discussed in Section 4.1.
5) Real Time Clock – a clock with the date: “Feb 07, ‘00” and
time: “hh:mm.” If the time or date on the clock is not
accurate, the user can adjust it.