889-1600-04
Model P-1400 Operations Manual Rev Apr 2020 Page
21
of 33
To set the mapping status of the Vital Input when in the Auxiliary Vital Output Mapping Program Mode, press the
CHAN
pushbutton once. The center character will flash indicating the current setting and the sixth bargraph
segment from the left will show the corresponding Vital Input mapping. Use the
(UP) or
(DOWN)
pushbutton to change the setting to the desired configuration. The two combinations of display characters and
bargraph display are shown below.
When in Normal Mode, repeatedly press the
FUNC
pushbutton to enter Program Mode and toggle through the set-
up parameters until the display screen shows the bargraph and three of the seven segment display characters. The
left character will flash indicating the current setting and the four leftmost bargraph segments will show the
corresponding Vital Input mapping. Press the
CHAN
pushbutton once. The center character will flash indicating
the current setting and the sixth bargraph segment from the left will show the corresponding Vital Input mapping.
Use the
(UP) or
(DOWN) pushbutton to change the setting to the desired configuration. The two
combinations of display characters and bargraph display are shown below.
Display Setting
Loop Status Inputs Selected
Any Input on Loops 4, 3, 2, or 1 will be
mapped to the Auxiliary Vital Output.
Any Input on Loops 4, 3, or 2 will be mapped
to the Auxiliary Vital Output.
Any Input on Loops 4, 3, or 1 will be mapped
to the Auxiliary Vital Output.
Any Input on Loops 4 or 3 will be mapped to
the Auxiliary Vital Output.
Any Input on Loops 4, 2, or 1 will be mapped
to the Auxiliary Vital Output.
Any Input on Loops 4 or 2 will be mapped to
the Auxiliary Vital Output.
Any Input on Loops 4 or 1 will be mapped to
the Auxiliary Vital Output.
Any Input on Loop 4 will be mapped to the
Auxiliary Vital Output.
3
4
1
2
Any Input on Loops 3, 2, or 1 will be mapped
to the Auxiliary Vital Output.
Any Input on Loops 3 or 2 will be mapped to
the Auxiliary Vital Output.
Any Input on Loops 3 or 1 will be mapped to
the Auxiliary Vital Output.
Any Input on Loop 3 will be mapped to the
Auxiliary Vital Output.
Any Input on Loops 2 or 1 will be mapped to
the Auxiliary Vital Output.
Any Input on Loop 2 will be mapped to the
Auxiliary Vital Output.
Any Input on Loop 1 will be mapped to the
Auxiliary Vital Output.
No Loop Inputs will be mapped to the Auxiliary
Vital Output.
Display Setting
Vital Input Mapping Status
Vital Input will not be mapped to the Auxiliary
Vital Output.
Vital Input will be mapped to the Auxiliary
Vital Output.
