Rae P-1400, Operation Manual

Page: 15 / 39

889-1600-04 Model P-1400 Operations Manual Rev Apr 2020 Page 9 of 33
When operating in Parallel Synch mode, if the master unit fails, all of the Vital Outputs of every detector
configured to operate in Synch mode will be deactivated. If one or more of the detectors connected to the master
unit Fails, only those Vital Outputs of the detector(s) that has (have) failed will be deactivated.
When operating in either Series or Parallel mode, FSY will be displayed on the LCD screen of the detector(s)
associated with the failure. This display state will continue until the problem is corrected and the detectors are
powered down and repowered, reset, or until the Synch function is turned off.
In either mode of operation, the Synch feature will continue to function if one or more detectors has (have) been
disabled.
3.4 TABLE: SENSITIVITY, -
∆
L/L, AND RESPONSE TIME
Sensitivity -
ΔL/L
Response Time (milliseconds)
One
Detector
Two Detectors Three Detectors Four Detectors
Series
Synch Parallel
Synch
Series
Synch Parallel
Synch
Series
Synch Parallel
Synch
OFF ------- ------- ------- ------- ------- ------- ------- -------
1 5.12 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
2 2.56 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
3 1.28 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
4 0.64 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
5 0.32 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
6 0.16 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
7 0.08 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
8 0.04 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
9 0.02 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
10 0.01 % 121 ±25 268 ±52 278 ±58 400 ±80 278 ±58 530 ±110 278 ±58
CALL ------- ------- ------- ------- ------- ------- ------- -------
3.5 TABLE: DEFAULT SETTINGS
Channel & Detector Settings
Function Channel 1 Channel 2 Channel 3 Channel 4
Frequency 2 4 6 8
Sensitivity 6 6 6 6
Option 1 - Loop Inductance Display OFF OFF OFF OFF
Option 2 - Loop Inductance -
ΔL/L (%) Display
OFF OFF OFF OFF
Option 3 - Noise Filter 3.00 3.00 3.00 3.00
Option 4 - Detection Zone Tracking 4.02 4.02 4.02 4.02
Option 5 - Sensitivity Boost 5.00 5.00 5.00 5.00
Option 6 - Audible Detect Signal OFF OFF OFF OFF
Loop Check Feature 005 005 005 005
Detector ID Setting 255
Option 7 - Synch Feature 7.00
Option 10- Inverted Vital Output OFF
Vital Output Settings
Function Setting
Primary Vital Output Delay Time 00.0
Primary Vital Output Extension Time 00.0
Primary Vital Output Mapping 00
Auxiliary Vital Output Mapping 000