MeshGuard User’s Guide
7 Sensor And Battery Replacement
Sensor compartment
Battery compartment
Sensor and battery
removal tool
(P/N 019-2044-000)
3-pin end
Hexagonal end
7.1 Battery replacement
1.
Use the 3-pin end of the tool to unscrew and open the battery cover
by turning it counterclockwise.
2.
Remove the battery.
3.
Insert the new battery with its positive (“+”) pole towards inside of
the unit.
4.
Replace the battery cover by turning it clockwise with the 3-pin end
of the tool.
Note:
Only Change battery in a safe location and use the battery RAE
Systems provided, model ER34615 or XL-205F. After changing the
battery, wait at least 60 seconds before turning the MeshGuard on.
39
