MeshGuard User’s Guide
38
6.4.1 Change Pan ID
Press Y/+ to enter the menu to make changes to the value.
1.
Press [Y/+] to increase the number and [N/-] to decrease it.
2.
Press [MODE] to advance to the next digit.
3.
After moving to the last digit and making changes, press
[MODE]. A question mark (?) is shown in the display, asking if
you want to save the change.
•
Press [Y/+] for yes. The message “dn” means the change is
done.
•
Press [N/-] for no. A “no” message means that the change
was abandoned.
•
Press [MODE] to return to the first digit.
6.4.2 Enable RFD or FFD
Press [Y/+] to toggle the setting from RFD to FFD, and vice versa.
6.4.3 Join Mesh Network
Press [Y/-] to initiate joining a network. Three bars flash in sequence
while it searches. When it is done, it alarms once and displays “dn” for
“done.”
6.4.4 Factory Setting
Press [Y/+] to return the MeshGuard to its original factory settings.
6.4.5 Audible & Visible Alarm Enable/Disable
Press [Y/+] to toggle between the MeshGuard’s audible and visible
alarms turned on and off.
6.4.6 Sensor Type
Select the type of sensor that is in the MeshGuard.
1.
Press [Y/+] to step through the sensor types.
2.
Press [MODE] to save your change. A question mark (?) is
shown in the display, asking if you want to save the change.
•
Press [Y/+] for yes. The message “dn” means the change is done.
•
Press [N/-] for no. A “no” message means that the change
was abandoned.
