Limited Warranty and Limitation Liability
Honeywell Analytics warrants the product to be free from defects in material and workmanship under normal use
and service for a period of two years, beginning on the date of shipment to the buyer. This warranty extends only to
the sale of new and unused products to the original buyer. Honeywell’s warranty obligation is limited, at Honeywell’s
option, to refund of the purchase price, repair or replacement of a defective product that is returned to a Honeywell
authorized service center within the warranty period. In no event shall Honeywell’s liability hereunder exceed the
purchase price actually paid by the buyer for the Product.
This warranty does not include:
a. fuses, disposable batteries or the routine replacement of parts due to the normal wear and tear of the product arising from use;
b. any product which in Honeywell’s opinion, has been misused, altered, neglected or damaged, by accident or abnormal conditions of operation,
handling or use;
c. any damage or defects attributable to repair of the product by any person other than an authorized dealer, or the installation of unapproved parts on
the product; or the obligations set forth in this warranty are conditional on:
d. proper storage, installation, calibration, use, maintenance and compliance with the product manual instructions and any other applicable
recommendations of Honeywell;
e. the buyer promptly notifying Honeywell of any defect and, if required, promptly making the product available for correction. No goods shall be returned
to Honeywell until receipt by the buyer of shipping instructions from Honeywell; and
f. the right of Honeywell to require that the buyer provide proof of purchase such as the original invoice, bill of sale or packing slip to establish that the
product is within the warranty period.
THE BUYER AGREES THAT THIS WARRANTY IS THE BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. HONEYWELL SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL, OR BASED ON CONTRACT, TORT OR RELIANCE OR ANY OTHER THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental
or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of
this warranty is held invalid or unenforceable by a court of competent jurisdiction, such holding will not affect the validity or
enforceability of any other provision.
Contact
Europe, Middle East, Africa
Life Safety Distribution GmbH
Life Safety Distribution GmbH
Javastrasse 2
8604 Hegnau
Switzerland
Toll-Free 00800 333 222 44
Middle East +971 4 450 5800
Middle East +971 4 450 5852
(Portable Gas Detection)
[email protected]
Technical Services
EMEA: [email protected]
US: [email protected]
AP: [email protected]
Americas
Honeywell Analytics Distribution Inc.
405 Barclay Boulevard
Lincolnshire, Illinois.
USA 60069
Tel: +1 847 955 8200
Toll free: +1 800 538 0363
[email protected]
Asia Pacific
Honeywell Analytics Asia Pacific
7F SangAm IT Tower,
434 Worldcup Buk-ro, Mapo-gu,
Seoul 03922, South Korea
Tel: +82 (0) 2 6909 0300
India Tel: +91 124 4752700
[email protected]
https://safety.honeywell.com
WEEE Directive and Battery Directive
Failure to comply with the following battery removal and disposal instructions may result in battery shorting,
battery leakage, and/or other damage. Ensure a qualified technician completes the following procedure.
Removal and Disposal of the Battery
Only a qualified technician should complete the following procedure.
Dispose of the battery according to local laws.
1. Deactivate the detector.
2. Remove the six machine screws on the rear shell
3. Remove the rear shell.
4. Over a table, hold the remainder of the detector face down in one hand and gently flip it over to remove the battery from its bracket.
5. The black and red leads are now better exposed for cutting.
6. Cut each lead individually.
7. Wrap the cut leads on the battery with electrical tape ensuring they do not touch.
8. Dispose of the battery according to local laws.
Item
Description
Item
Description
1
Rear shell screws
3
Battery
2
Rear shell
4
Front Shell
Supplementary Booklet
Conformity Declarations
ECN00003587
2004Y0059
EU Declaration of Conformity
In accordance with EN ISO / IEC 17050-1:2010
G
AS
A
LERT
M
ICRO
C
LIP
XL,
G
AS
A
LERT
M
ICRO
C
LIP
X3
Declaration Number
: 2004Y0059_09
Description:
Portable multi-gas detector
Intended Use:
Monitoring of toxic gas, Oxygen and combustible gas concentrations.
Manufacturer:
BW Technologies by Honeywell
- 4411 6
th
Street SE, Calgary, Alberta T2G 4E8
Canada
Trading Company:
Life Safety Distribution GmbH,
Z.A. La Piece 16, 1180 Rolle, Switzerland
We hereby declare that the product identified above meets the requirements of the following EU Directives
and therefore qualifies for free movement within markets comprising the European Union (EU) and the
European Economic Area (EEA).
This declaration is issued under the sole responsibility of the manufacturer.
ATEX Directive 2014/34/EU
ATEX Hazardous
Notified Body:
DEKRA Certification BV - Meander 1051, 6825 MJ Arnhem, Netherlands
Notified Body Number:
0344
EC Certificate Number:
DEKRA 19ATEX0025
Conforms to:
EN IEC 60079-0:2018
Explosive atmospheres - Part 0: Equipment - General requirements
EN 60079-1:2014
Explosive atmospheres: Equipment protection by flameproof enclosures "d"
EN 60079-11:2012
Explosive atmospheres: Equipment protection by intrinsic safety "i"
Type Approval:
II 1 G Ex da ia IIC T4 Ga
Production Quality Assurance
Notified Body:
UL International Demko A/S - Borupvang 5A, 2750 Ballerup. Denmark
Notified Body Number:
0539
QA Notification Number:
10 ATEX Q133296 (Calgary)
10 ATEX Q142995 (Juarez)
16 ATEX 7788Q (Shanghai)
Conforms to:
EN ISO/IEC 80079-34:2020 Explosive atmospheres: Application of quality systems for equipment manufacture
ECN00003587
2004Y0059
EMC Directive 2014/30/EU
Conforms to:
EN 50270:2015
Electromagnetic compatibility: Electrical apparatus for the detection and measurement of
combustible gases, toxic gases and oxygen
RoHS Directive 2015/863/EU
Consideration given to
EN IEC 63000:2018
Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
Signature:
Name:
Steve Uliasz
Date:
1
st
October 2021
Quality Engineer
For and on behalf of
BW Technologies by Honeywell,
4411 6th Street SE, Calgary, Alberta T2G 4E8 Canada
https://sps.honeywell.com
QRG Part Number 50181459-001 EN Rev. B
©2022 Jan, All rights reserved
