EchoView Host
User’s Guide
30
7.2.4
Channel Setup
All units in a network must operate on a single channel. The available
channels vary by the internal wireless modem’s frequency, and channel
ranges are set by RAE Systems to correspond with the wireless modem
frequency.
These are the modem frequencies and channel ranges:
869 MHz:
Channel 0 (channel cannot be changed)
900 MHz:
Channels 1 through 10
Note:
You can use “Form Net” to automatically have the EchoView
Host select the least-congested channel.
Scroll until “Channel Setup” is selected.
Press [MODE] to view or change the channel. The range of available
channels is shown in parentheses. The screen also shows the channel
number, with the cursor blinking on the first digit:
Step from digit to digit from left to right by pressing [MODE]. Change a
digit’s value by pressing [Y/+] to increase and [N/-] to decrease. When
you press [MODE] you see a flashing “?” after the second digit:
Summary of Contents for EchoView Host
Page 2: ...Copyright 2012 RAE Systems Inc...
Page 8: ...EchoView Host User s Guide 8...
Page 41: ......