Rae EchoView Host, User Manual, Page: 25 / 42

EchoView Host
User’s Guide
25
7.1.7
Page Disable
The Page feature can be enabled to allow up to four additional EchoView
Host “mimic panels” to be used as part of a closed-loop system.
When the Page feature is enabled, the EchoView Host broadcasts
instrument data. These data can be picked up by mimic panels. If no
mimic panels are planned to be used, this feature should be disabled, in
order to ensure data privacy.
Note: The default value is “Disabled.”
To enable (or later to disable) the feature, press [MODE] to reach this
screen (if it is already enabled, it will say “Page Disable?):
Press [Y/+] to change the setting. After the setting is accepted, this
screen is shown (or one that says “Page Disabled”):
7.1.8
Exit
Scroll until “Exit” is selected.
Press [MODE] to return to the Programming Menu.
Note: If you do not make a selection in 60 seconds, it automatically exits
to the menu.