Radyne ComStream SFC6400A, Installation And Operation Manual

Page: 112 / 156

Appendix A SFC6400A/SFC1450A Synthesized Frequency Upconverter
A-22 TM106 – Rev. 1.1
A.32 Get Gain Offset (Upconverter Only)
This command displays the value for the Gain Offset. The command is as follows:
@01/GAINOFFSET?<cr>
If successful, the converter will return the following string:
<cr><lf>
Gain Offset Value = gg:
{gg is the gain offset value}
<cr><lf>
<cr><lf>
{End of transmission}
A.33 Set Gain Offset (Upconverter Only)
This command sets the value for the Gain Offset. The command is as follows:
@01/GAINOFFSET = <cr>
If successful, the converter will return the following string:
<cr><lf>
Gain Offset Value = gg:
{gg is the gain offset value}
<cr><lf>
<cr><lf>
{End of transmission}
A.34 Dump Channel Table (All)
This command returns the contents of the Channel Table. The command is as follows:
@01/DMPCHAN<cr>
If successful, the converter will return the following string:
<cr><lf>
[ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g]
[ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g]
[ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g]
[ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g]
[ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g] [ffff.f,sgg.g]
<cr><lf>
<cr><lf>
{End of transmission}
where:
ffff.f
{f = frequency for channel entry]
sgg.g {s = ‘+’ or ‘-‘ : gg.g = Gain for channel entry]