Radwin 5000, Configuration Manual

Page: 17 / 252

RADWIN 5000 Configuration Guide Release 4.9.17 2 ‐ 6
Log ‐ on Errors and Cautions RADWIN Manager Overview
The following table summarizes these options:
The Network Manager should change the default passwords as soon as possible, particularly
if SNMPv3 is to be used.

Continuing the log ‐ on procedure:
4. If your User Type is not Operator, then choose it now.
5. Enter the password.
6. If you are a user with Read ‐ Write permission, click Options to enter the Community
options if required.
2.5 Log ‐ on Errors and Cautions
2.5.1 Unsupported Device
Attempting to connect to an unsupported device on an otherwise valid IP address (for
example, a LAN printer) will result in the following error message:
Figure 2 ‐ 7: Unsupported device message
Table 2 ‐ 2: User types, default passwords and function
User Type
Default
Pass ‐
word
Function
SNMPv1 SNMPv3
Community
Community
String
Password
Default
Value
Observer admin Monitoring Read ‐ Only public Read ‐ Only public
Operator admin
Installation,
configuration
Read ‐ Write netman Read ‐ Write netman
Installer wireless
Operator plus
set ‐ band
Read ‐ Write netman Read ‐ Write netman
• Leave the default Community passwords, netman for read ‐ write,
and public for read ‐ only.
• If you are a user with read ‐ only permission, then you may only log
on as Observer.