RADWAG UYA 4Y, User Manual

Page: 23 / 196

- 23 -
Wireless connection pictogram:
No. Pictogram Description
1 Correct connection of wireless modules – correct cooperation
2 Connection interrupted – loss of connection
3.8.3. Settings
In order to provide long enough operation while powering the device by means of battery, the correct
parameters of group MISCELLANEOUS must be set, <Sleep mode> <Display brightness>. For
detailed information go to section 34 of this user manual:
Miscellaneous .
4. START-UP
1. On plugging the balance to the mains, instrument’s diode ON/LOAD
located on indicator’s housing is lit up.
2. Press power key located on the left. Within a few seconds the OS Windows and
RADWAG software start loading, it is signaled by flickering red diode ON/LOAD.
3. On completing the startup procedure, the main window of the balance software is displayed.
4. The balance starts up with no user logged in. In order to start operation it is necessary to log in.
(logging procedure description to be found further down this user manual).
CAUTION! Remember to start the balance when unloaded.
5. KEYBOARD – BUTTONS’ FUNCTIONS
Key Description
Press to switch the balance ON/OFF
Press to Zero the balance
Press to Tare the balance
Press to send measurement to a printer
or a computer
Press to enter the main menu of a
balance
Press to select working mode
Press to select user profile
Press to trigger an internal adjustment