- 78 -
On enabling the printout editing mode select a number of a non-standard printout (1-4) and
the place for the beginning of text in a printout (text strings from 1 to 80). Then, go to option
Edit to design a printout template or Erase all to erase all designed printout templates.
Fig. 64. Printout editing – selecting printout components
Use
navigating arrow keys
(up
and
down)
to move the cursor between the following
fields. Press
RIGHT ARROW KEY
to add a selected component to a printout template.
On completing editing of a printout template press
ENTER/PRINT
key. The display shows
a message asking whether to create a printout template – once again press
ENTER/PRINT
key to confirm
17.2.3.
Activating non-standard printouts
If an active printout template is set to STANDARD, then a printout comprises data on
measured mass and variables declared in the GLP menu
(see point 17.1 Standard
printout – Fig. 60. Declaring variables for a printout – submenu GLP).
If a user wants to enable a non-standard printout template (1 to 4), then they need to select
a non-standard printout template and specify its beginning and end (the text strings of
printout start and stop)..
