- 95 -
17.2.1.
Setup for mode COUNTING PIECES
The software allows entering settings for each working mode. Some the
settings are identical in all working modes. They are described in section
relating to the mode <WEIGHING>.
This section covers only the settings relating to the mode <
COUNTING
PIECES
>.
F button shortcuts
The function enables the option of quick access for weighing functions,
which are available when buttons F1, F2, F3 or F4 are pressed.
In the mode <
COUNTING PIECES
> the following options are available,
which a user can assign to each of the
F
buttons:
NONE
– no function assigned to the button
ENTER SAMPLE
– function initiates the option of entering the reference
mass of a single piece
DETERMINE SAMPLE
– function initiates the option of automatic
determination of the mass of a single piece from a number of samples of
known quantity
SELECT PRODUCT
– function initiates the option of selecting a product
from product database
LOG IN
– function initiates the option of selecting and logging-in of a
balance’s user
ENTER TARE
– function initiates the option of inserting packaging mass
SELECT TARE
– function initiates the option of selecting packaging
mass from product database
PRINT HEADER
– function initiates the print-out of a designed header
PRINT FOOTER
– function initiates the print-out of a designed footer
VARIABLE 1
– function initiates the selection and editing of variable 1
VARIABLE 2
– function initiates the selection and editing of variable 2
The way of declaring the function is described in the section relating to
the weighing mode settings <F button shortcuts>.