RADWAG APP 35.R2 User Manual Download Page 135

Page: 135 / 165

- 135 -

In order to operate properly, you should set the threshold in grams. It is

the indicating point beyond which the function starts to register

maximal force apllied.

•

From now on the balance registers and holds every single weighment

which is above the threshold, and is higher than the result of the

previous peak hold. If the software detects a mass above the

threshold, the highest detected indication is held on the main display

and the pictogram <Max> is shown at the top of the display.

A user can print the result out by pressing

button.

The start of the next process of peak hold measurement is possible only after

removing the load from the weighing pan and pressing

button. This causes

returning to the main mode <PEAK HOLD> and automatically deleting the

pictogram <Max> on the top of display.

17.8.8.

Returning to the weighing mode

Summary of Contents for APP 35.R2






































































































































































Search results

Summary of Contents for APP 35.R2

Reviews:

Related manuals for APP 35.R2

Brands by name

Popular brands

RADWAG APP 35.R2, User Manual

Search results

Summary of Contents for APP 35.R2

Reviews:

Related manuals for APP 35.R2

Brands by name

Popular brands