Figure 5-5
Adding a new video network device
•
To modify the basic attributes of the device, select the link of the device in the Name
column, and select the Configure tab if present.
Step 5
Enter or modify the basic settings for your device, as described in
. SCOPIA
Management then connects to the devices and retrieves additional information, such as the
version number.
Figure 5-6
Adding a new gateway
Table 5-1
Configuring your device's basic settings
Field Name
Description
Name
Enter the name used to identify the device. This name will
be displayed in the list of devices.
IP Address
Enter the device's management IP address, as configured
during device installation.
Location
This is only relevant for service providers or deployments
with multiple locations.
Select the device’s location.
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Configuring your SCOPIA Solution for Interoperability with Cisco Telepresence | 29
