19
Manual
–
AlphaFreshbox 60
4.
Re-install the master plate with a sealing tape back. Fix the
master plate from the MK-Freshbox 60 mounting kit on
outer wall side to align the air ducts with respect to each
other. Fix the master plate from the mounting kit
somewhat lower to ensure the minimum required slope
3°. Before mounting the master plate press the perforated
holes to remove the master plate fragments and prepare
holes for the air ducts.
5.
Insert the air ducts inside the holes in the master plate
designed for the air ducts and seal those with a mounting
foam through the holes in the master plate. Install the air
ducts sloped down by 2-3° to ensure the condensate
drainage from the unit.
6.
After the mounting foam gets hard (see the solidification
time in the product specification) remove the master
plate and cut off the protruding parts of the air ducts to
be flush with the inner wall. On outer wall side, the air
ducts must protrude for 10 mm to prevent condensate
dropping on the wall.
Summary of Contents for 50-012
Page 1: ...AlphaFreshbox 60 Manual February 2021 ...
Page 34: ......
