Rado Anatom 10.366.76.1, Instruction Manual

Page: 22 / 36

19
QUartz WatcHeS
WitHoUt croWn
fig iv
caliber: 964
To set the time on crownless watches, use
the magnetic pin or the enclosed magnet
accessory to press the respective contacts
on the caseback (FIG IVb) forward (+)
or backward (–) to set the desired time.
To adjust the time forward or back one
minute at a time, maintain contact for
1 second; for 30-minute adjustments,
maintain contact for around 3 seconds;
to adjust by several hours, maintain contact
for around 4 seconds.
QUartz cHronograpH WatcHeS
fig v
caliber: 538*
* On certain models these movements have
no 1/10th of a second counter. In this
case the timekeeping is precise to 1 second.
tHe croWn HaS 3 poSitionS
normal position
position 1
When pressed up against the case
(position 1), the crown ensures that the
watch is water-resistant (if not damaged).
to set the date
position 2
Pull the crown out to position 2 and set
the date by moving the hour hand forwards
or backwards. To adjust by one day, the hour
hand must be moved by 24 hours. Push
the crown back to position 1.