4
5044-794
3. SURFACE CLEANER OPERATION
WARNING!
This surface cleaner is compatible with most pressure washers. A
pressure washer, hose, gun, and lance (none included) are required to
operate this surface cleaner. Do not operate with any pressure washer
exceeding 3300PSI, higher pressures will damage this device and may
cause injury.
Note
Your pressure washer lance must be equipped with a female ¼” quick
connection fitting.
1. Ensure your pressure washer is turned off. Assemble your pressure washer,
hose, gun, and lance.
2. Depress the trigger on your pressure washer gun to release any pressurized
water from the assembly.
3. Place the surface cleaner on a level, hard surface.
4. Connect the end of your pressure washing lance to the male quick connect
coupler located at the top of the surface cleaner.
5. Start the pressure washer.
6. Place surface cleaner on the surface you are cleaning, firmly grip the gun and
lance, and depress the trigger to start cleaning.
Note
To stop, turn off your pressure washer and depress the trigger to release
any pressurized water from the assembly before disconnecting the
surface cleaner.
1/4” Female Quick Connect
Coupler on Lance (not included)
1/4” Male Quick
Connect Coupler
