9
1 Eye Shield
2 Spark Deflector
3 Wheel Cover
4 Power Switch
5 Interlocking Knob
6 Tool Rest
7 Magnifier Shield
8 Eye Shield Rod
9 Grinding Wheel
10 Grinding Wheel
WARNING: Read the entire important safety information section at the beginning of this manual including All text
Under subheadings therein before assembling or use of this power tool.
WARNING: To prevent serious injury from accidental operation, disconnect the power plug before carrying out any
adiustements
or maintenance.
WARNING: Always make sure your bench grinder is securely mounted to
a
workbench or an approved workstand. Failure to do so could result in
an accident resulting in possible serious personal injury.
Mounting Eye Shield Rod and Eye Shield
•
Mount the left and right eye shield rod (8) to the inside of the wheel guards
using the clamp brackets and Interlocking Knob.
•
Use the illustration (Fig.3) as a guide to determine which eye shield rod is
mounted on the left and which eye shield rod is mounted on the right of the
grinder.
•
Once eye shield rods are firmly in place, slide the shield bracket onto the shield
rod. Tighten the carriage bolt leaving it loose enough to allow the eye shield to
be raised and lowered easily.
Mounting Spark Deflector
•
Using hex bolts and washers attach the spark deflector (2) to the inside of the
wheel guard. (Fig.4)
•
Adjust the spark deflectors to within 1/16 in. of the grinding wheel. Tighten the
hex bolts securely.
Eye Shield Rod
Clamp Bracket
Interlocking
Knob
