FORWARD/REVERSE SWITCH
1. To drive screws, press the upper portion of the trigger switch (1) (Fig. 5).
2. To remove screws, press the lower portion of the trigger switch (2).
1 2
Fig. 5
LED WORK LIGHT
The LED work light (1) will automatically turn ON when the trigger switch is activated
(Fig. 6). It will automatically turn OFF when the trigger switch is released.
1
Fig. 6
WARNING
For safety reasons, the operator must read the sections of this Owner’s Manual entitled
“GENERAL SAFETY WARNINGS”, “POWER TOOL SAFETY”, “SPECIFIC SAFETY RULES”,
and “BATTERY AND CHARGER SAFETY” before using this screwdriver.
Every time you use the screwdriver you should verify the following:
1. Screwdriver bit is the correct type & size, not worn and not damaged in any way.
2. Workpiece is properly secured.
3. Safety glasses are being worn.
Failure to adhere to these safety rules can greatly increase the chances of injury.
8
1248-202
4V MAX RETRACTABLE SCREWDRIVER KIT
