4
1239-221
ELECTRICAL SAFETY
WARNING:
use proper circuit protection.
WARNING:
Ventilation openings in batteries and chargers must always
be open to allow cooling air to circulate freely. Air vents that are
blocked, restricted or covered may result in the battery or charger
overheating. Overheating may lead to damage to the tool or cause a
POWER TOOL SAFETY
WORK AREA SAFETY
Keep work area clean and well lit.
Do not operate power tools in the presence
the dust or fumes.
Keep children and bystanders away while operating a power
tool.
Distractions can cause you to lose control.
Power tool plugs must match the outlet.
Never modify the plug in any way. Do
plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock.
Never use the cord for carrying, pulling or unplugging the power tool.
Keep
cord away from heat, oil, sharp edges or moving parts. Do not use a damaged
or tangled cord.
When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of a ground fault circuit
interrupter (GFCI) reduces the risk of electric shock.
