DSR 9000 Twin 2005.02.04 (GB) - 20
Use the buttons to move to the last field on the list.
Press the
OK
button. The screen will change to allow you to
change the name of the satellite you are adding. Use the -
buttons to enter letters. Use the buttons to change the
cursor position.
When you have finished entering the satellite name, press
the
OK
button.
Press the
OK
button to enter the added satellite's
TP
information .
Press the EPG button.
Use the buttons and the buttons to select the time and the Program.
Press the TIMER button. The selected recording is added to the Timer List.
8. Main Menu Guide
8.1 General Settings
8.2 Channel Manager
8.3 Installation
GB
Main Menu Guide
20
9. EPG Recording
This function enables you to use the EPG time information to book a recording on the VCR.
8. Recording
Starts the recording according to the above settings. Press the OK button.
NOTE :
A message appears 1 minute before the recording start time, asking you whether or not to
proceed with the recording. To proceed with the recording, press the OK button. Otherwise, press
the Exit button.
Even if the power is turned off, the Receiver will automatically power on at the recording start time
to proceed with the recording. When the recording ends, it will return to its previous state.
Once the recording has started, none of the buttons on the front panel except the POWER button
will respond panel display of the Receiver.
If the program type is set to "Once" , it will be deleted from the Recording List after the recording
ends. If the program type is set to "Daily" or "Weekly" , the channel recording information will be
changed to the next scheduled date and then stored.
Refer to Section
7.3 on Channel Manager
for details.
Refer to Section
5.2 on General Setting
for details.
1. Auto Search, Manual Search
Refer to Section
7.1 on Channel Search
for details.
2. Transponder Editor
The Transponder Editor allows you to change, add, and delete
TP and satellite information.
Press the MENU button on the remote control to go to the
Main Menu.
Go to "
Installation
", and then select
"Transponder Editor
",
and then press the
OK
button.
1). To Add the Satellite and TP information
