manualshive.com logo in svg

Radius RADIUS GM300, Manual

Share
Download
Radius RADIUS GM300 Manual Download Page 38

Getting Started GM300 Radio Service Software Manual

2-26 

6880902Z36-B October, 1996

Navigating Through RSS Menus

2

2.7.4.5

Main Menu

After pressing any key at the BANNER screen, the MAIN MENU (see below) appears.

Figure 2-6. The Main Menu

From here you can begin to program a radio, but first we will explain how to move around within the 
menus and screens of the RSS with the keyboard keys. The parts of a menu are described in Section 2.8.2 
- Anatomy of a Menu.

2.8 Navigating Through RSS Menus

You have successfully started RSS and are ready to learn just what it is you see on the display, how to 
move around, how RSS is organized, how to change the feature choices, and finally, how to exit.

2.8.1 Keyboards Keys and Their Functions

Now that the RSS Main Menu is on your display, to proceed any further you may want to know about the 
keyboard keys and what they do. Every action of RSS is controlled by you through the use of formatted 
displays and function keys. The function keys are the ten keys labelled F1 to F10 grouped on the left hand 
side of the keyboard on some keyboards or the twelve keys labelled F1 to F12 at the top of other key-
boards. 

  

Summary of Contents for RADIUS GM300



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands