O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s
ten
_ v 0 1 . d o c x
S e i t e
7
v o n
9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
3.4
Additional information
By selecting the "add" button on the control menu, another Radius fan can be selected by
standing near this fan to ensure a strong radio connection (indicated by the green bars).
If a fan cannot be added using the Add button, the app must be reset and the pairing has to
be performed again as described above.
If this does not work in exceptional cases, the controller must be set current-free for about
20 seconds and the pairing process must be carried out afterwards.
If a further fan is added, the others must be disconnected from the power supply (current-
free switching/unplugging). Only the newly programmed sun protection may be connected
to the mains! Otherwise, you risk a malfunction of the fans that are already in operation.
4
Operation with a radio handled transmitter
The keys M1 - M3 are memory keys and any position can
be defined and then moved to automatically as with the
iOS app. Move to the desired position and press the
Memory button
3 times and then the desired memory
position M1-M3.
Use the
button to move the fan to the park position
and the button to the
midday position.
The fan can be moved manually using the other symbol
function keys.
After a power failure, the handheld transmitter is in teach-
in mode for 2 minutes. It is only ready for operation again
after these 2 minutes.
Additional fans can be connected during
installation in the menu sequence
"
Connect to another sunscreen?
"menu
sequence by pressing the green ok button
or by repeating the coupling procedure
described above.
