D6500 Computer Interface Manual
74-05313-000-G 10/16/97
Page 13
© 1988-1997 Radionics, Inc.
4.4 D6500 Internal and External Output Messages
The following pages list the messages that can be seen on the internal and external printers (40 character
single or double line mode), or a computer terminal display connected to the RS-232 output (D6500 or SIA
Mode). See Figures 5, 6, and 7 for individual character (byte) descriptions. A detailed explanation of
interpreting internal printer 40 Character Mode messages can be found in the
D6500 Operation and Installation
Manual.
a
= account number digit (
0-F
) / second line: area ID
b
= busy seconds percentage digit (
0-9
)
c
= second line: code change ID
d
= date digit / second line: SDI ID or External Device ID
g
= second line: cross point group number or route group
h
= programmable header character / second line: hour, phone line #, or phone index #
i
= subzone digit or MASTER combo ID digit (
0-F
) / second line: user ID or operator ID
j
= Listen-In time digit
k
= second line: SKED ID
l
= line number digit (
1-8
) or second line: level
m
= second line: minute
n
= second line: condition
p
= second line: point ID or communication path ID
q
= (L)ine, (G)roup, (B)FSK, or (M)odem II
Always included in 40 character printed message.
r
= receiver number digit (
0-9
) / second line: relay ID
s
=
space
t
= programmable trailer character (t is also used as a time digit)
v
= software version number digit (
0-9
) / second line: value
x
= D6112 zone number digit reported as a decimal number (
10-16
) /
second line: subuser ID
y
= D8112 point digit associated with a home zone or Comex ID
z
= D6112 zone or D8112 master zone number digit reported as a (
0-F
)
not exp
= not expanded report
#
= pulse error expansion digit
Table 6: DIGIT/CHARACTER CODE - PRINTER / D6500 / SIA MODES
NOTES: Account numbers with less than 4 digits have leading spaces in the D6500 mode.