2
Radionics, Inc.
74-07113-000-B 4/94
Bell Test
The Bell Test powers the external bell with the
burglar pattern for 2 seconds.
• Press ( 1 )
The Bell Test times out after 2 seconds.
Battery Test
The Battery Test causes the panel to run on
battery only for 4 minutes. During this time if the
voltage drops below 12.2, the trouble tone
sounds and the low battery condition appears in
the “Check Trouble Mode”.
When the Battery Test is initiated by the user
initiating "Test System", a Low Battery report or
a Missing Battery report will be sent if
programmed.
• Press ( 2 ).
The Battery Test times out in 4 minutes.
Communication Test
The Communication Test sends a Test report to
the receiver. If the report fails to be
acknowledged after all dialing attempts, the
D2112 goes into Communications Failure.
• Press ( 3 ).
The Communication Test times out immediately.
1
2
3
