33
To set an entry, press and hold the ENT key on the current entry and a submenu
will pop up
Select Edit to change settings
Input name
: Name of the current entry. Use the scroll wheel to select a letter or
number. Press and hold the ENT key to switch between upper and lower case.
Press the ENT key to switch to the next character.
Line name
: Because each entry can have multiple lines of configuration, you can
give each line a name to avoid confusion in the future
Source
: Press and hold the ENT key to enter the input source selection menu.
Scroll up or down to the desired category and press ENT to select the
corresponding input source
