43
gimbal are equal, the type of v2 at this time is not digital data, but a
source
a>b
Triggered when parameter v1 is greater than parameter v2
a<b
Triggered when parameter v1 is less than parameter v2
△≥x
△ is the mathematical symbol Delta (difference value). It is
triggered when the difference of the parameter v1 itself is greater
than or equal to the value of data v2. Switch, this item only judges
the difference when v1 changes from small to large
|△|≥x
Triggered when the absolute value of the difference of the
parameter v1 itself is greater than or equal to the value of v2. This
judges the absolute value. Since the negative value also becomes
positive, a change from v1 to v or from v1 to trigger the current
logic switch
Timer
The switch that automatically loops all the time. V1 is the on time
and v2 is the off time. It can be defined by v1 and v2 to
automatically cycle at constant intervals.
Sticky
v1 can only switch on, v2 can only switch off
AND Switch
: With the arithmetic switch, this item can set any physical switch
and logic switch. The current logic switch can be triggered when the switch set
by this item and the current item meet the conditions
Duration
: Hold time, the length of the current logic switch after it is triggered. If
there is no parameter, the default is always on. If this item is set for time (0.1-25
seconds), the current logic switch will automatically turn off after this time.
Delay
: Delay, after the trigger is turned on, the range is 0.0 to 25 seconds.
