Introduction
Thank you for purchasing the RadioMaster POCKET radio system. Advanced and highly-versatile, POCKET is
adaptable for pilots of any skill level. To ensure safe and reliable operations, please read this manual carefully
prior to use.
As the software and hardware are constantly improved, the information contained in this manual is subject to
change without prior notice. Please visit our website for up-to-date information and radio firmware.
POCKET is an open-sourced, ergonomic radio with powerful multi-protocol capability. Able to bind to most
contemporary protocols on the market, this is one radio to rule them all! POCKET runs EdgeTX, an open-sourced
operating system; for more information, please visit the EdgeTX link below.
-The RadioMaster team
Radio-controlled models commonly contain sharp components like propellers, rotating at high RPMs; when
operating or maintaining the model, always use common sense and proceed with caution.
Always disconnect power to the model AND remove propellers (if applicable) during the assembly or maintenance
process.
Never operate the POCKET radio system in the following conditions:
• In severe weather or strong windy conditions, such as rain, hail, snow, storms or electromagnetic environments.
• In limited visability.
• In the proximity of other people, property, high-voltage power lines, public roads, vehicles or animals
• When feeling unwell, or under the influence of drugs or alcohol.
• If the POCKET radio system/model is damaged or showing signs of interference.
• In areas with high 2.4GHz interference or where 2.4GHz radios are prohibited.
• When the TX/RX battery is low.
• In areas where local regulations prohibit the use of R/C aircraft.
Safety Information
Manual and firmware download
POCKET is pre-installed with factory approved EdgeTX firmware. To download the latest manual or stock factory
firmware, please visit the RadioMaster website: https://www.radiomasterrc.com
To download the latest EdgeTX firmware for your POCKET radio system, please visit the EdgeTX website:
https://www.edgetx.org
Important
！
Gimbal adjustment
POCKET is pre-installed with the most stable firmware at the factory at time of release. please
only attempt to update the firmware if you are confident in the process. Incorrect firmware updates may cause
the remote control to become inoperable. Damage as a result of improper firmware update may not be covered
under warranty.
1
A
B
C
D
A
B
C
D
A) L-R to switch M1/M2. Turn clockwise to disable self-centering
(Throttle). Turn counterclockwise to enable self-centering (Elevator).
B) T to adjust the throttle stick tension. Turn clockwise to increase
stick tension. Turn counterclockwise to decrease stick tension.
C) (Up-Down) Turn clockwise to increase vertical stick tension.
Turn counterclockwise to decrease stick tension.
D) (Left-Right) Turn clockwise to increase horizontal stick tension.
Turn counterclockwise to decrease stick tension.
